Dazey hair dryer is a popular brand of hair dryer in the market.

The dazey hair dryer is popularly in use in the market for its classic heat settings that include cold, low, medium, high and off heat settings. The dryers feature adjustable types that are suitable for salons. The chair reclines and allows the person who wants to dry to set a convenient position for personal use. There are other dryers that require no support. You can use dry as your hands get busy doing other things.

Hair dryers find a lot of use in a day if especially they are used in commercial places like a salon. The appliance gets clogged with dirt that hinders its effective functioning. The dazey hair dryers are no exception to this problem. To increase its lifespan, you then need to open it up and do the necessary cleaning. Here are the precautions that you should observe while disassembling the dryer to access the inside:

- Always unplug the power source before you start working on it. If you work on it while it is still connected, you can get severely electrocuted.

- Using a small flat head screwdriver, loosen the tiny screws located where the nozzle connects with the dryer's body. Remove the exterior filters. Mostly, these filters are not screwed hence they can easily be removed off. Older filters may be screwed like the nozzle is. A new filter will just pop off when tried. This allows them to be easily cleaned.

- Dismantle the internal filter screen. Run some water over it to remove dust, hair lint and the pebbles that may accelerate internal parts abrasion. Sometimes you can use a magnet to remove the dust in other parts of the hair dryer that water may cause damage. The hair can be extracted using the tweezers. If the filter is broken, replace it with a new one. This can help you to reduce the chances of a foreign material getting into the internal section.

- Loosen the screws while holding the whole framework of the dryer together. This prevents the falling apart of the dryer's body after unscrewing. If the body of the dryer falls apart, the wiring of the internal parts of the dryer might get disconnected increasing the amount of work to be done. Once the screws are removed, you have the access to the internal parts of the Dazey hair dryer.

To remove any other parts just loosen the screws from the Dazey hair dryer plastic frame as you did with the heating element.

- To remove any other parts, just unscrew them from the Remington hair dryer plastic frame as you did with the heating element.